First, critical context: Most standard IGET Bar models are designed as single-use disposable vapes, meaning they are not officially engineered to be recharged. Attempting to recharge a non-rechargeable IGET Bar carries significant safety risks (battery swelling, leakage, overheating, or even fire) and will void any remaining product warranty. As a trusted Australian vape analyst, I strongly recommend against DIY recharging for non-rechargeable devices.
That said, if you still choose to proceed (at your own extreme risk), here’s what some users have attempted:
DIY Recharging Steps (Not Recommended)
Tools You’ll Need
An old Android charger (micro-USB or USB-C, depending on your charger type)
Wire stripper or sharp knife
Electrical tape or heat shrink tubing
Multimeter (optional, to identify battery terminals)
Step-by-Step Process
Access the Battery: Carefully pry open the IGET Bar’s plastic casing using a flat tool (like a screwdriver). Be gentle—puncturing the battery or Capacity reservoir can cause leakage or injury.
Identify Terminals: Locate the lithium-ion battery inside. Most batteries have positive (+) and negative (-) markings; if not, use a multimeter to confirm (red probe to positive, black to negative).
Prepare the Charger: Cut the end off your Android charger (the part that plugs into your phone). Strip back the outer insulation to expose the internal wires—typically red (positive) and black (negative) (other colours may be present but can be ignored).
Connect Wires: Match the red wire from the charger to the battery’s positive terminal, and the black wire to the negative terminal. Secure the connections with electrical tape to prevent short-circuiting.
Charge Carefully: Plug the charger into a low-amperage power source (e.g., a computer USB port, not a fast-charging wall adapter). Monitor the device closely—unplug it immediately if you see swelling, heat, or leakage.
Safer Alternatives: Official Rechargeable IGET Models
Instead of risking DIY recharging, opt for IGET’s purpose-built rechargeable disposable vapes, which are designed to be safely recharged via a USB-C cable (compatible with most Android chargers). These models include:
IGET Bar Plus: Boasts 3,500 puffs, a rechargeable battery, and a wide range of authentic flavours.
IGET E-Hookah G1: A flagship 60,000-puff device with a digital display, adjustable airflow, and USB-C recharging.
IGET Max: 5,000 puffs, compact design, and a rechargeable battery for extended use.
All these models are available from iGetBaroz (Australia’s trusted vape retailer), where you’ll find 100% authentic products, fast shipping across major cities (Melbourne, Sydney, Brisbane), and dedicated customer support.
Final Safety Reminder
DIY recharging of non-rechargeable vapes is never a safe or recommended practice. Disposable vapes are designed to be discarded once the battery or Capacity runs out. For a reliable, safe experience, choose officially rechargeable models from trusted suppliers like iGetBaroz. For more tips on IGET products, check out their YouTube channel for tutorials and reviews.
