How to Open the IGET Goat (And Critical Safety Notes)
The IGET Goat is a premium high-capacity disposable vape from iGetBaroz (opens in new window), engineered as a sealed, one-use device to guarantee consistent performance and user safety. It is not designed for disassembly by users, opening it may void any warranty, expose you to irritant Capacity, or pose battery-related hazards (such as leakage or short circuits). However, if you need to open it for responsible battery recycling or minor troubleshooting (and accept these risks), follow these safe, step-by-step instructions:
Table of Contents
Step 1: Prepare Safety Gear & Tools
Put on nitrile gloves to avoid Capacity contact and safety glasses to protect your eyes. Grab a plastic pry tool (a credit card works as a backup, but a dedicated tool reduces scratching) and a small, flat-head screwdriver (optional for tight seams).
Step 2: Locate the Device Seam
The IGET Goat’s body splits between the upper mouthpiece/Capacity reservoir and the lower battery compartment. Run your finger along the edge to find the thin, visible seam connecting these two sections, this is your starting point.
Step 3: Gently Pry the Seam
Insert the plastic pry tool into a small gap in the seam (often near the bottom of the mouthpiece section). Apply slow, even pressure to work the tool around the device’s circumference. Avoid excessive force, as this can crack the plastic housing or damage the internal battery.

Step 4: Separate Components Carefully
Once the seam is loosened, pull the two sections apart gently. The upper part contains the Capacity reservoir and coil, while the lower section holds the rechargeable battery (if your model includes one) and circuit board. Do not puncture the battery or spill Capacity during this process.
Step 5: Post-Disassembly Next Steps
For recycling: Remove the battery carefully (never puncture or crush it) and take it to an approved battery recycling center in Australia (local councils or retail stores like Officeworks offer this service). Dispose of remaining components per your local waste guidelines.
For troubleshooting: Inspect the coil or airflow pathway if fixing a minor issue (e.g., blocked airflow), but note that disposable device components cannot be easily replaced.
Key Tips for Australian Vapers
If you face issues with your IGET Goat (e.g., no vapor, weak Options, or leakage), contact iGetBaroz’s customer support first, they can assist with warranty claims, replacements, or troubleshooting without requiring you to open the device. Purchasing authentic IGET products from iGetBaroz means compliance with Australian safety standards, minimizing the risk of defects in the first place.

How To Open Iget Goat?
The IGET Goat is a popular high-puff disposable vape, known for its substantial e-liquid capacity and long-lasting battery. If you’re wondering how to “open” or start using it, the process is straightforward, as the device is designed for simplicity.

Here is a step-by-step guide to get your IGET Goat up and running.
Step-by-Step Activation Guide
Unpack the Device: Remove the IGET Goat from its retail packaging. You will typically find the device sealed in a foil pouch for freshness.
Locate the Mouthpiece: The mouthpiece is the end you draw from. It may have a removable silicone stopper or sticker covering the airflow. Remove this seal completely.
Inspect for Airflow Holes: Some models have small airflow holes on the side or bottom. Make sure these are not blocked by any remaining packaging.
It’s Draw-Activated: The IGET Goat has no buttons. To activate it, simply place your lips on the mouthpiece and take a firm, steady inhale (a “puff”). The device will automatically heat the e-liquid and produce vapour.
Important Notes:
Do Not Attempt to Refill: The IGET Goat is a sealed, non-refillable, and non-rechargeable disposable device. Attempting to open or refill it will damage the device and void any potential warranty.
Priming (If Needed): On rare occasions, a new device may benefit from a few short, sharp puffs to help draw e-liquid into the coil before your first full inhale.
What If It Doesn’t Work?
If you’ve removed all seals and the device doesn’t produce vapour when you inhale:
Check the Seal: Double-check that every sticker or silicone plug has been removed from the mouthpiece and any airflow paths.
Battery is Pre-Charged: The device comes fully charged from the factory. If it’s genuinely faulty (a rare occurrence with authentic products), it may be a defective unit.
Where to Get Authentic IGET Goat Devices
For a guaranteed authentic experience, reliable performance, and access to the full range of flavours, always purchase from an authorised retailer like iGetBaroz{:target=”_blank”}. They source directly from official distributors, making sure you receive a fresh, fully functional, and genuine product every time.
Enjoy your vape responsibly.

For independent background on vaping in Australia, see our guide to vaping rules in Australia.
Common mistakes to avoid
The first is drawing on a fresh pod immediately after fitting it. The mesh needs a minute to saturate, and skipping that pause is the usual cause of a burnt note that lingers for the rest of the pod.
The second is charging with a high-current fast charger. Most pod bodies are designed for a standard 5V/1A adapter, and a laptop brick adds heat without filling the battery any faster.
The third is storing spare pods loose in a bag. The contact base picks up lint, which leads to a weak connection and a draw that feels inconsistent.
For more options in the range, see our shop.
Iget Goat: what buyers should know
Choosing iget goat comes down to how often you vape and whether you want to recharge a body or replace a whole unit. A pod system keeps the battery and swaps the part that wears out, which usually costs less over a month.
Check the packaging for a sealed authenticity code, keep the device upright between sessions, and charge with a standard adapter rather than a high-current brick. Those three habits cover most of the day-to-day care that iget goat needs.
You can compare options in our online vape shop.