The IGET Bar Pro is a popular disposable vape device known for its ease of use and maintenance-free design. It is engineered as a sealed, single-use unit, meaning it is not intended to be opened or refilled by the user. However, if you need to check the battery or internal components for recycling or troubleshooting purposes, here is a detailed, cautious guide.
Important Warning
Opening a disposable vape like the IGET Bar Pro will:
Irreversibly damage the device.
Void any warranty.
Potentially damage the internal battery or Capacity pod, causing leaks.
Pose a safety risk if the battery is punctured or improperly handled.
Proceed at your own risk and with caution.
Step-by-Step Instructions
You will need: A small flat-head screwdriver or a prying tool, and a cloth to protect the device and your hands.
Locate the Seam: Examine the IGET Bar Pro. The main body consists of two plastic halves pressed together. The seam runs along the entire edge of the device.
Insert Your Tool: Gently insert the tip of your flat-head screwdriver or prying tool into the seam, preferably near the mouthpiece or the bottom end.
Apply Gentle Pressure: Carefully twist or lever the tool to begin separating the two halves. Work your way slowly around the seam. Do not use excessive force, as this can crack the plastic housing or puncture the internal battery.
Separate the Halves: Once the adhesive or clips give way, you should be able to pull the two halves of the outer shell apart.
Internal Inspection: Inside, you will typically find:
The Battery: A small, rectangular lithium-ion battery.
The Atomizer Coil: Attached to the Capacity saturated wick.
The Capacity Reservoir (Pod): A plastic or silicone container holding the pre-filled Capacity.
Airflow Sensor & Wiring: The small circuit board that activates the device when you inhale.
What If It’s Not Hitting or Seems Blocked?
Instead of opening it, try these safer troubleshooting steps first:
Check the Charging Port: The IGET Bar Pro is rechargeable via USB-C. If it’s not producing vapour, it may simply be out of battery. Connect it to a low-power charger (like a computer USB port) for 20-30 minutes.
Clear the Mouthpiece: Sometimes, condensation or Capacity can block the airflow. Gently blow through the mouthpiece (away from your face) or use a tissue to absorb any visible residue.
Check for a Protective Film: Ensure you removed any small protective sticker from the bottom or mouthpiece when you first unboxed it.
The Safer Alternative: Responsible Use and Disposal
The IGET Bar Pro is designed for convenience. When the Capacity is depleted or the battery no longer holds a charge, the safest and most recommended practice is to dispose of it responsibly.
Do not throw it in regular household waste.
Take it to a dedicated Battery or E-Waste recycling point (available at most major electronics retailers or local council waste stations) to ensure the lithium battery is processed safely.
For a reliable, hassle-free experience with authentic IGET products and great customer support, consider purchasing from an authorised retailer like iGetBaroz. They ensure you get a fully functional, sealed device every time.
Disclaimer: This guide is for informational purposes only. Tampering with electronic devices can be dangerous. Always prioritize safety and proper disposal.