Why Is My Iget Bar Hissing?

A hissing sound from your IGET Bar is usually normal but can occasionally indicate an issue. Let’s break down the common causes and what you should do.

Common & Typically Normal Causes

Coil Priming: When you first start using a new device or after it’s been idle, the Capacity saturates the coil. The initial few puffs may produce a faint crackle or hiss—this is normal and means the coil is working correctly.
Airflow & Vaporisation: As you draw, the air flows over the heated coil, instantly vaporising the Capacity. This process can create a soft sizzling sound, similar to water droplets on a hot pan. This is generally a sign of proper function.

Causes for Concern (Requiring Attention)

Capacity Flooding / Gurgling: If the hiss is accompanied by a gurgling sound, spitting capacity, or a less smooth draw, the atomiser may be flooded. This can happen if the device is:

Stored on its side for a long period.
Exposed to significant temperature or pressure changes (e.g., left in a hot car, taken on a flight).
Action: Try gently flicking the device (mouthpiece down) into a tissue to remove excess capacity. Take a few firm, short puffs (without inhaling) to clear the chamber.

Battery Malfunction (Rare but Serious): A continuous, loud hissing sound when you are not drawing on the device is a major red flag. This could indicate an internal short circuit or battery failure.

ACTION: IMMEDIATELY stop using the device. Place it in a safe, non-flammable area (away from flammable materials) and monitor it. Do not attempt to charge it. Dispose of it responsibly as soon as possible.

Physical Damage: If the device has been dropped or damaged, the internal seal may be compromised, causing leaking and subsequent hissing/gurgling.

Troubleshooting Checklist

Sound Type: Is it a soft sizzle (normal) or a wet gurgle (flooding)?
Timing: Does it only happen when you puff (normal), or does it continue afterwards (problematic)?
Performance: Is the flavour and vapour production still good? If yes, it’s likely normal operation. If it’s weak, spitty, or harsh, it may be flooded or faulty.
Inspect: Check the mouthpiece for any visible Capacity pooling.

Final Recommendation

If the hissing is mild, only occurs during use, and the device performs well, it’s most likely normal operation. If it’s gurgling, spitting, or the sound persists unattended, treat it as a potential fault.

Your safety is paramount. If you have any doubt about the device’s integrity—especially if the hissing seems abnormal or the device gets warm when not in use—it’s best to stop using it and replace it.

For authentic replacements and support, visit iGetBaroz. If your device is faulty and was recently purchased, check our warranty policy or contact our customer service team for assistance.

A faint hissing sound from your IGET Bar is usually normal, but understanding why it happens can give you peace of mind. Here’s a breakdown of the common causes and what to do.

Primary Causes of the Hissing Sound

Normal Operation (Most Common): The sound is often just the device’s heating element (coil) vaporising the liquid as you draw. A soft, brief hiss when you inhale is typically a sign the device is working correctly.

Condensation or Minor Liquid in the Airway: Sometimes, a small amount of condensation or liquid can gather in the central tube. When you inhale, air passing through this can create a gurgling or hissing noise.

Accidental Auto-Draw Activation: The device is draw-activated. If it’s in a warm pocket, bag, or is being pressed against something, changes in air pressure might trigger the sensor very briefly, causing a short hiss.

When to Be Concerned & Quick Fixes

Persistent Hissing When Not in Use: If it hisses continuously for more than a second or two without you drawing on it, this is unusual. Place the device in a safe, open area away from flammable materials and monitor it. If it continues, it may be faulty.

Gurgling Sound & Reduced Vapour: This points to a slightly flooded coil. Try these steps:

Gently flick the device (mouthpiece down) onto a tissue to dislodge any excess liquid.
Remove any visible pod or mouthpiece cover and check the airway for blockage.
Draw on it firmly for a few seconds without powering it (if possible) to clear the airway.

Important Note on Authenticity: Consistent performance issues, including strange noises, can sometimes be linked to counterfeit products. For guaranteed quality and safety, always purchase from authorised retailers like iGetBaroz, which sources 100% authentic IGET products directly from the manufacturer.

Final Recommendation

A brief hiss during use is standard. For persistent, active hissing when idle, safely set the device aside. For any device that behaves erratically, stops producing vapour, or you have concerns about its authenticity, it’s safest to dispose of it responsibly and replace it with a genuine product from a trusted supplier.

For more detailed troubleshooting and authentic replacements, you can visit the official source at iGetBaroz{:target=”_blank”}.