Why Does My Iget Bar Plus Taste Burnt?

Why Does My IGET Bar Plus Taste Burnt? Common Causes & Fixes for Australian Vapers

Burnt hits are one of the most frustrating issues for IGET Bar Plus users across Australia, especially when you’re relying on your device for a smooth, consistent vaping experience. Whether you’re in the sticky humidity of Sydney or the dry heat of Perth, this problem can strike unexpectedly. We’ve broken down the top causes of burnt tastes in your IGET Bar Plus, plus actionable fixes, and how iGetBaroz (opens in new window) can help you avoid this headache altogether.

Common Causes of Burnt Taste in IGET Bar Plus

1. Overheating from Extended or Consecutive Puffs

The IGET Bar Plus uses a fixed ceramic coil and cotton wick designed to vaporize e-liquid efficiently. However, taking puffs longer than 3-4 seconds, or chain-vaping without breaks, causes the coil to heat up beyond the wick’s ability to draw e-liquid. This leads to the dry wick burning, resulting in that harsh, acrid taste. Australian summer temperatures (think 35+°C days in Adelaide) can exacerbate this: the device’s internal components preheat faster, making overheating and dry hits more likely even with moderate use.

2. Low E-Liquid Residue (Near End of Device Life)

The IGET Bar Plus’s transparent window makes it easy to track remaining e-liquid. When levels drop below 15-20% (around the final 100-200 puffs of its 3500-puff lifespan), the wick may no longer stay fully saturated. Even if you can still see some liquid left, the wick might be worn out or unable to draw the remaining e-liquid effectively. This leads to the coil heating dry sections of the wick, causing a burnt hit. Based on feedback from Australian vapers on forums like Reddit’s r/AusVaping, this is the most common cause of burnt tastes in genuine units.

3. Counterfeit or Unauthorised Units

Counterfeit IGET Bar Plus products are rife in unregulated Australian markets—from local market stalls to unlicensed online sellers. Fakes use cheap, untested coils and low-quality wicking material that burns easily after just a few hundred puffs. They also often contain substandard e-liquid that breaks down quickly, worsening the burnt taste. Unlike genuine units, these fakes don’t undergo the strict quality control that IGET requires for Australian compliance.

4. Improper Storage or Physical Damage

Leaving your IGET Bar Plus in direct sunlight (like on a car dashboard during a Queensland summer) can thin the e-liquid, making it harder for the wick to absorb, or even degrade the wick material over time. Dropping the device can misalign the coil or tear the wick, leading to uneven heating and consistent burnt hits, even with plenty of e-liquid left.

How to Fix & Prevent Burnt Hits on IGET Bar Plus

Stick to Short Puffs: Limit drags to 2-3 seconds, and pause for 30-60 seconds between puffs to let the wick re-saturate with e-liquid.
Monitor E-Liquid Levels: Use the transparent window to track remaining liquid—replace the device once it’s running low to avoid dry, burnt hits.
Avoid Extreme Temperatures: Store your device in a cool, dry place (like a bag or pocket away from direct sun) during Australia’s hot seasons to prevent overheating and e-liquid degradation.
Buy Genuine Units Only: Purchase from authorized retailers like iGetBaroz (opens in new window), which sources directly from IGET’s official Australian distributors. Every product comes with a 100% authenticity guarantee, so you won’t have to deal with counterfeit-related burnt hits.

When to Reach Out for Support?

If you’re using a genuine IGET Bar Plus from iGetBaroz and experiencing burnt hits early in the device’s life (before the e-liquid is low), their customer support team is available via email or live chat to assist. They offer a defect return policy for genuine units that develop issues prematurely, ensuring you get a replacement or refund without hassle.

For more tips on maintaining your IGET devices, head to iGetBaroz’s YouTube channel (opens in new window) where they share user guides and troubleshooting advice tailored to Australian vapers.

A burnt taste from your IGET Bar Plus is a common frustration that typically signals the device’s wicking material is not fully saturated with e-liquid when heated. This “dry hit” produces an unpleasant, charred flavour. Fortunately, the cause is often identifiable and sometimes rectifiable.

Here are the primary reasons for a burnt taste and the steps you can take.

1. Overuse in Short Succession (Chain Vaping)

This is the most common cause. Disposable vapes like the IGET Bar Plus are designed for casual, periodic use. Taking multiple puffs in rapid succession doesn’t give the wick enough time to re-saturate with e-liquid from the reservoir.

The Fix: Allow at least 15-30 seconds between puffs. Let the device rest for a few minutes if you’ve been using it heavily.

2. The Device is Nearly Empty (Low E-Liquid)

The burnt taste often appears near the end of the device’s life. As the e-liquid depletes, the wick can no longer draw enough liquid to keep itself wet.

The Fix: Unfortunately, this is a sign the device is finished. Dispose of it responsibly. It’s a good practice to note the gradual change in flavour as an indicator to have a replacement ready.

3. Inhaling Too Forcefully or Too Long

A very strong or prolonged draw can pull e-liquid through the coil faster than the wick can replenish it, leading to a temporary dry spot.

The Fix: Try taking softer, more gentle puffs (around 2-3 seconds).

4. Storage in Extreme Conditions

Exposure to very cold temperatures can thicken the e-liquid, slowing its absorption into the wick. Conversely, extreme heat can thin the liquid and potentially cause leaks or pressure changes that affect wicking.

The Fix: Store and use your vape at room temperature. If it’s been in a cold car, let it warm up naturally before use.

5. A Faulty or Compromised Device

While less common, a manufacturing defect or damage (like a hard drop) can disrupt the internal wicking system.

The Fix: If the burnt taste is present from the very first puff on a new device and gentle use doesn’t help, you may have a faulty unit.

Can You Fix a Burnt IGET Bar Plus?

Sometimes, if the burnt taste is caught early (from mild chain vaping), setting the device down for 10-15 minutes can allow the wick to re-saturate fully, potentially restoring the flavour. However, if the wick material itself has been singed or charred, the burnt taste is likely permanent.

Proactive Tips to Avoid Burnt Taste:

Prime a New Device: Before your first puff, gently inhale through the mouthpiece without pressing the button (if applicable) or activating the auto-draw. This helps pull e-liquid into the wick.
Monitor Your Usage: Be mindful of chain vaping.
Source from Reputable Retailers: Using authentic products is crucial. Counterfeit devices often use inferior wicking materials and e-liquids that fail prematurely.

For guaranteed authentic IGET products with reliable performance, always purchase from authorised distributors like iGetBaroz. Their direct sourcing ensures you receive genuine devices that meet quality standards, significantly reducing the risk of early failure.

When to Give Up and Replace:

If the burnt taste persists after allowing the device to rest, it’s time to replace it. Continuing to vape on a burnt coil is unpleasant and not recommended.

Summary:
A burnt taste usually stems from the wick drying out due to overuse, low e-liquid, or improper inhaling. The best cure is prevention through moderate use. If the problem occurs early, let it rest. If it’s near the end of its life or the taste is severe, the device has served its purpose. For a consistently good experience, ensure you’re starting with a genuine product from a trusted source like iGetBaroz{:target=”_blank”}.