A common question we receive at iGetBaroz is from customers asking how to “unlock” their IGET Bar Plus. It’s important to clarify first: standard disposable vapes like the IGET Bar Plus do not have a manual lock/unlock feature like some rechargeable pod systems.
If your IGET Bar Plus is not producing vapour when you inhale, it isn’t “locked”—it’s likely experiencing one of a few common, easily addressed issues. Here is a step-by-step guide to troubleshooting and resolving the problem.
Step 1: Perform the Initial Check
Often, the simplest solution is the correct one.
Remove the Protective Stickers: Check both ends of the device. There is usually a clear protective sticker over the mouthpiece and sometimes another over the airflow sensor or bottom. Peel these off completely. This is the most frequent reason a new device won’t activate.
Check the Airflow: Ensure the airflow holes (usually small slits near the base) are not blocked by packaging, your fingers, or debris.
Step 2: Basic Troubleshooting
If the stickers are off and it still won’t hit, try these steps:
Firm Inhale: Take a firm, consistent draw directly from the mouthpiece. Some sensors require a specific airflow pressure to activate.
Check for Blockages: Look into the mouthpiece. In rare cases, condensed e-liquid can block the central chimney. Gently flick the device or use a tissue to dab any visible excess liquid.
Allow it to Acclimatise: If the device has been in a cold car or a very hot environment, the e-liquid may have thickened or thinned, affecting the wick. Let it sit at room temperature for 15-30 minutes.
Step 3: Addressing “Auto-Firing” or a Persistent Bad Taste
Sometimes, the issue isn’t that it won’t fire, but that it seems to fire incorrectly.
Clean the Sensor: If the device activates on its own (auto-fires) or tastes burnt immediately, the airflow sensor may be flooded. Remove any pod or mouthpiece cover (if applicable) and gently blow into the bottom or charging port (not the mouthpiece) over a tissue. This can clear excess liquid from the sensor.
Priming the Coil: If you suspect it’s a new device with a dry wick (less common with disposables but possible after storage), cover the airflow holes and take 2-3 short, sharp pulls without powering the device (i.e., without inhaling to activate it). This can help draw liquid into the coil.
Step 4: When to Seek Support
If none of the above steps work, your device may be faulty. Disposables are mass-produced and, while quality control is high, a small percentage may have a dead battery, a disconnected wire, or a defective sensor from the factory.
This is where choosing a trusted retailer like iGetBaroz is crucial. We guarantee that all our products are 100% authentic and sourced directly from authorised distributors, which significantly reduces the chance of receiving a faulty unit. However, if you do, our customer service team is here to help.
What We Recommend at iGetBaroz
If your IGET Bar Plus is confirmed to be defective:
Stop using it immediately to avoid any potential safety issues with a malfunctioning battery.
Contact our support team with your order details. We have clear policies in place to handle defective products and will guide you through the warranty or replacement process efficiently.
Avoid attempting to “fix” it by taking it apart. Tampering with the sealed battery and e-liquid reservoir is dangerous and will void any possibility of a replacement.
Q: I’ve done all the steps and my IGET Bar Plus is still not working. What now?
A: Your device is likely defective. Please contact the retailer you purchased it from immediately with proof of purchase. At iGetBaroz, we stand behind every product and will resolve such issues promptly under our warranty policy.
Q: Can a disposable vape be locked by accident?
A: No, standard disposable vapes like the IGET Bar, Bar Plus, or IGET ONE do not have a locking mechanism. The issue is always related to airflow, protective seals, or a hardware fault.
Q: How can I avoid this problem in the future?
A: Always purchase from authorised, reputable sellers like iGetBaroz. Counterfeit or poorly stored products have a much higher failure rate. Our direct supply chain ensures you receive fresh, authentic, and fully tested devices every time.
For more insights, reviews, and guides on getting the best from your vaping products, check out our external resource hub on YouTube @AidiHk.