Many vapers, looking to maximise value or reduce waste, ask if they can refill a popular disposable like the IGET Bar Plus. The short, professional answer is: The IGET Bar Plus is designed and manufactured as a sealed, single-use, non-refillable device. Attempting to refill it is not recommended, is often unsuccessful, and can pose safety risks.
However, understanding the “why” behind this and exploring legitimate alternatives is crucial. Here’s a comprehensive breakdown.
Why Refilling an IGET Bar Plus is Problematic
Sealed Design: Unlike open pod systems, the Bar Plus is ultrasonically welded shut. Forcing it open usually breaks the plastic housing, compromising its structural integrity. It will rarely seal properly again.
No Fill Port: There is no dedicated rubber plug or port for adding e-liquid. You would need to locate the cotton-wrapped coil and try to saturate it directly, which is imprecise and messy.
Risk of Leakage & Damage: Even if you get liquid in, the device lacks the seals to contain it. Capacity can leak into the battery compartment, causing a short circuit, auto-firing, or complete failure.
Battery Limitations: The battery is matched to the original e-liquid capacity. Extending use beyond its intended cycle can lead to the battery dying before the new e-liquid is exhausted, creating a frustrating experience.
Flavour Contamination & Performance: The coil is primed for a specific flavour and nicotine strength. Adding a different e-liquid often results in muted, mixed, or unpleasant flavours. The coil’s lifespan is also finite and will not be “reset” by adding more liquid.
If You Still Want to Attempt It: A Candid Walkthrough
Disclaimer: This is for informational purposes only. Proceed at your own risk. iGetBaroz and the manufacturers do not endorse this and any damage or safety issues are the sole responsibility of the user.
Tools Needed: Small flat-head screwdriver or prying tool, needle-tip bottle of your e-liquid, paper towels.
Step-by-Step:
Locate the Mouthpiece End: The sealed end is opposite the LED light. You’ll see a seam where the plastic casing meets the mouthpiece.
Pry It Open: Carefully insert your tool into the seam and gently twist to pop the mouthpiece cap off. Apply minimal force to avoid shattering the plastic.
Identify the Components: Inside, you’ll see the cotton-wrapped coil and the tank chamber. It will likely be mostly dry if the device is finished.
Apply E-Liquid: Slowly drip your e-liquid directly onto the exposed cotton. Avoid over-saturating. Let it soak in for several minutes.
Reassemble: Press the mouthpiece cap back on as firmly as possible.
Test: Wait 10 minutes, then take a gentle puff. Expect potential gurgling, leaking, or poor vapour production.
Real-World Outcome: Most users find this process yields a device that leaks within hours, provides weak flavour, and fails prematurely. The cost and hassle far outweigh the small saving.
Smart, Safe & Reliable Alternatives from iGetBaroz
Instead of risking a messy and potentially unsafe refill, consider these superior alternatives that offer better value and performance:
Choose a Higher-Capacity Disposable: If you love the convenience of disposables but want longer life, simply upgrade your model.
IGET Bar Series: The standard IGET Bar (1800 puffs) is perfect for moderate use. The IGET Bar Plus (3500 puffs) you’re asking about is the sweet spot for many. For heavy users, the IGET ONE (4000+ puffs) offers even greater longevity.
Explore Other Brands: Brands like Alibarbar and WALA offer similar high-puff-count devices with different flavour profiles, all available as 100% authentic products at iGetBaroz.
Switch to a Refillable Pod System (The Best Long-Term Solution):
For vapers who want ultimate control over flavour, nicotine strength, and cost, a refillable pod system is the logical next step. You buy the device once and only replace the prefilled or refillable pods/coils.
Benefits: Dramatically lower cost per puff, endless flavour options, adjustable power, and reduced environmental waste.
Perfect for: Vapers ready to move beyond disposables without the complexity of large mods.
Frequently Asked Questions (FAQ)
Q: Can I recharge an IGET Bar Plus?
A: No. The IGET Bar Plus uses a non-rechargeable battery designed to last the life of the pre-filled e-liquid. Attempting to recharge it is dangerous and can cause battery failure.
Q: My IGET Bar Plus still has liquid but won’t produce vapour. Can I fix it?
A: This usually indicates a depleted battery or a faulty connection. As a sealed unit, it cannot be repaired. This is where purchasing from an authorised retailer like iGetBaroz matters, as they can advise on warranty support for genuine products.
Q: Where can I buy authentic IGET products in Australia?
A: To guarantee safety, performance, and access to customer support, always purchase from authorised sellers. iGetBaroz is a trusted Australian retailer, sourcing all IGET, Alibarbar, FISCO, and WALA products directly from official distributors.
Conclusion
While the curiosity to refill an IGET Bar Plus is understandable, the practical and safety realities make it an unwise choice. The device excels because of its sealed, maintenance-free design. For a better vaping experience and true value, consider moving to a higher-capacity disposable or investing in a refillable pod system.
For authentic devices, reliable performance, and expert advice tailored to the Australian market, explore the full range of options at your trusted partner, iGetBaroz. For more insights and reviews, you can also check out community discussions on platforms like YouTube.