Important Disclaimer: The IGET Bar Plus is designed and sold as a sealed, non-refillable, disposable device. Tampering with the device will void any warranty, can damage the device, and may pose safety risks, including leakage and battery issues. The following information is for educational purposes only.
If you need to check for a potential fault or are attempting a very cautious inspection, here is the general method.
Step-by-Step Guide
Confirm Your Device: Ensure you have an IGET Bar Plus. It is a rectangular, flat disposable vape with a rounded mouthpiece. It is not the larger “Box” or “Stick” style.
Locate the Seams: The device is made of two main plastic halves sealed together. The primary seam runs around the entire outer edge.
Opening Method: The most common point of access is near the mouthpiece.
Tools Needed: A thin, sturdy prying tool like a small flat-head screwdriver, a guitar pick, or a plastic spudger.
Process: Gently insert your tool into the small gap where the mouthpiece meets the main body. Apply slow, even pressure to begin separating the plastic clips that hold the two halves together. Work your way around the device slowly, unclipping each section.
Caution: The internal silicone seals and the plastic housing are delicate. Excessive force will crack the casing or damage internal components, rendering the device useless.
What You’ll Find Inside: Once open, you will see:
A silicone pod or reservoir containing the e-liquid.
A cotton-wicked coil attached to it.
The integrated battery.
Wiring and an airflow sensor.
Critical Safety & Practical Notes
Not Refillable: The e-liquid chamber is a sealed silicone pod. It is not designed to be refilled. Attempting to do so will almost certainly cause leaks and likely damage the coil.
Risk of Damage: The act of prying it open can break the plastic, tear the silicone pod, or disconnect the wiring. This is the most common outcome.
If You Suspect a Fault: If your IGET Bar Plus is leaking, not firing, or tastes burnt straight out of the package, do not open it. Your safest and most effective course of action is to contact the retailer you purchased it from. A reputable seller like iGetBaroz has policies to handle defective products.
The Better Alternative: If you desire a refillable system, consider switching to a pod vape kit. These are designed for easy, safe opening and refilling.
What to Do Instead
If your goal is to troubleshoot or resolve an issue with a new IGET Bar Plus:
Check the Basics: Ensure you are inhaling directly from the mouthpiece (it’s auto-draw, no button) and that the protective film on the mouthpiece has been removed.
Contact the Seller: Reach out to your point of purchase with details of the issue (e.g., “device arrived and does not produce vapour” or “is leaking from the bottom”). Provide your order number.
Purchase from Trusted Sources: To minimise the risk of receiving a faulty device, always buy from authorised retailers like iGetBaroz{:target=”_blank”}, who source genuine products and offer customer support.
Conclusion: While it is physically possible to open an IGET Bar Plus, it is not recommended or supported. The device is a high-quality, pre-filled disposable meant for use until the e-liquid is depleted, after which it should be disposed of responsibly. For a refillable experience, exploring dedicated open-pod systems is the correct and safe path.
For more insights into device maintenance and product ranges, you can check out external resources like this overview on YouTube{:target=”_blank”}.