When your IGET Bar stops working unexpectedly, it can be frustrating—especially if it still seems to have e-liquid remaining. While disposable vapes are designed for single use with a finite lifespan, some non-functional issues can be resolved with simple troubleshooting. Before you assume the device is completely dead, try these steps to get it working again.
Step-by-Step Troubleshooting Guide
Follow these steps in order. Many issues are caused by simple airflow blockages or contact problems.
Step 1: Basic Checks & Cleaning
This solves the majority of “sudden death” issues.
Check the Airflow Sensor: Disposable vapes like IGET Bars are activated by an airflow sensor when you inhale. Gently blow into the mouthpiece for 2-3 seconds. This can sometimes clear minor condensation or e-liquid that is blocking the sensor.
Clean the Contacts: Use a dry cotton bud or tissue to wipe the gold-plated contacts at the bottom of the device. Remove any pocket lint, dust, or e-liquid residue that might be preventing a proper connection with the internal battery.
Clear the Mouthpiece: Check the mouthpiece for any visible blockage or accumulated e-liquid. Wipe it clean with a tissue.
Step 2: The “Flick” Method
If the device has been stored on its side or in a warm environment, e-liquid may have flooded the coil and airflow channel.
Hold the IGET Bar firmly with the mouthpiece facing away from you.
Give it several sharp, downward flicks (like flicking a pen) into a sink or over a tissue. This uses centrifugal force to draw excess liquid out of the central tube.
Wipe the mouthpiece and let the device sit upright for 5-10 minutes before trying again.
Step 3: Check for a Blocked Airflow Inlet
Look at the base or sides of your IGET Bar for small air intake holes. Ensure they are not blocked by the packaging sticker, your fingers while holding it, or debris. Uncover any blocked holes.
Step 4: Gentle Warmth (Use with Caution)
If the device has been in a very cold environment, the e-liquid may have thickened.
Do NOT use a hairdryer, microwave, or open flame.
Simply roll the device gently between your palms for a minute or place it in a room-temperature pocket for 10-15 minutes. This can thin the liquid enough to allow proper wicking.
Step 5: The Last Resort – Checking for a Protective Seal
Some newer IGET products have a removable silicone seal at the base or over the mouthpiece for transport. Double-check your device and packaging to ensure you have removed all protective covers or plugs.
When to Stop: Signs Your IGET Bar Is Truly Finished
If you’ve tried all the above and your device still shows no sign of life (no light, no vapour, no airflow), it is likely fully depleted. Do NOT attempt to take it apart, poke objects into it, or recharge it. Disposable vapes are not user-serviceable and tampering can damage the internal battery, causing a safety hazard.
Your IGET Bar is almost certainly finished if:
The Light Doesn’t Activate: You inhale and no LED lights up at all.
It’s Well Past Its Puff Count: You’ve been using it consistently for days.
The Flavour Has Drastically Faded or Tasted Burnt: This indicates the coil and wicking material are spent.
It Has Been Accidentally Submerged in Liquid.
How to Avoid Issues with Your Next IGET Bar
Prevention is the best medicine. Following these tips will ensure you get the full, intended lifespan from your device.
Buy from Authorised Retailers: The number one cause of premature failure is counterfeit products. Always purchase from a trusted source like iGetBaroz{:target=”_blank”}, which guarantees 100% authentic IGET devices with full manufacturer integrity.
Store Properly: Keep your vape in a cool, dry place, upright if possible. Avoid extreme heat (like a car dashboard in summer) or cold.
Take Gentle Puffs: Avoid short, sharp, hard drags. Take slower, steadier draws to prevent flooding the coil.
Use It Regularly: Letting a disposable sit unused for months can lead to battery discharge or e-liquid separation.
Frequently Asked Questions (FAQ)
Q: Can I recharge an IGET Bar?
A: No. Official IGET Bars are non-rechargeable disposables. Attempting to recharge them is dangerous and can lead to battery failure. If you want a rechargeable device, consider an IGET Bar Plus or IGET Legend model from their range.
Q: My new IGET Bar isn’t working straight out of the package. What should I do?
A: First, perform the basic checks in Step 1. If it still doesn’t work, contact your retailer immediately. Reputable sellers like iGetBaroz have customer service policies to handle such cases. Have your order details ready.
Q: How can I be sure I’m buying a real IGET product?
A: Purchase from established retailers with verifiable trust signals. For example, iGetBaroz sources directly from authorised distributors and provides transparent customer support. Check for proper packaging, holographic security stickers on the box (for applicable models), and correct spelling/marketing.
Q: Why did my IGET Bar suddenly start leaking?
A: Leaking is often caused by changes in air pressure (like on an airplane), exposure to high heat, or physical damage. It can also be a sign of a counterfeit device with poor quality control.
Conclusion
While some IGET Bars can be revived with simple cleaning and troubleshooting, their nature as disposable devices means they will eventually reach a permanent end. The most reliable way to ensure a satisfying, full-lifespan experience is to start with a guaranteed authentic product from a reputable supplier.
For your next purchase, explore the full, authentic range of IGET products and other leading brands like Alibarbar, FISCO, and WALA at Australia’s trusted destination, iGetBaroz{:target=”_blank”}. For more insights and community discussions, you can also check out external resources like their official channel on YouTube{:target=”_blank”}.
