Important Warning: Disassembling any disposable vape, including the IGET Legend, is not recommended by the manufacturer. It voids all warranties, can damage the device, and poses potential safety risks, particularly concerning the lithium-ion battery. This guide is for informational purposes only, often for proper battery disposal or understanding the device’s construction. Proceed with extreme caution and at your own risk.
The IGET Legend is a popular high-puff-count disposable. Taking it apart requires care due to its integrated battery and sealed construction.
Why Disassemble?
Common reasons include:
Responsible Disposal: To separate the battery from the plastic and metal components for recycling.
Curiosity/Repair: To understand its build or attempt a fix (though successful repairs are rare).
Battery Removal: For safe battery disposal at a dedicated facility.
Tools You Will Need
A small flat-head screwdriver or a prying tool (guitar pick, spudger).
Needle-nose pliers.
Protective gloves (recommended).
A clean, well-lit workspace.
Step-by-Step Disassembly Guide
Step 1: Remove the Mouthpiece
The IGET Legend typically has a fixed or slightly recessed mouthpiece. Look for a thin seam around the base of the mouthpiece.
Gently insert your flat-head screwdriver or prying tool into this seam.
Apply careful, even pressure to lever the mouthpiece cap off. It is usually pressure-fitted or lightly glued.
Once removed, you will see the silicone seal that prevents leakage and the central chimney leading to the coil.
Step 2: Access the Tank and Battery Compartment
With the mouthpiece off, you can see into the top of the device. The inner assembly is typically a long, cylindrical pod/tank surrounded by absorbent cotton, all housed in a plastic shell.
The next goal is to separate the outer shell. The device is usually sealed along a central seam.
Locate the seam running along the body of the IGET Legend.
Use your screwdriver to carefully pry open the plastic shell along this seam. You may need to work your way around the device. The shell is often sonic-welded, so it may require firm but controlled force to split.
Step 3: Remove the Internal Pod and Battery
Once the outer casing is open, the internal components will be visible:
The E-Liquid Tank/Pod: This is a long, transparent plastic tube containing the e-liquid and the coil assembly. It may be wrapped in cotton. It can usually be pulled straight out.
The Battery: A small, rectangular lithium-ion battery will be connected to the bottom of the pod/tank assembly via thin wires.
CRITICAL: Handle the battery with extreme care. Do not puncture, bend, or short-circuit the terminals.
If your goal is battery removal, use needle-nose pliers to gently disconnect the wires (usually soldered or spot-welded). Do not cut both wires at the same time with metal tools, as this can short the battery.
Step 4: Separate Materials for Disposal
Battery: Take the removed lithium-ion battery to a dedicated battery recycling drop-off point (found at many electronics retailers, supermarkets, or waste facilities). Do not throw it in general waste.
Plastic/Metal Casing: This can often be recycled with plastic waste, but check your local council guidelines.
E-Liquid Components: The pod, cotton, and remaining e-liquid should be wrapped in paper and disposed of in general waste.
Critical Safety Notes & Warnings
Battery Hazard: The battery is the most dangerous component. Puncturing it can cause fire, explosion, or release of toxic fumes. If the battery is damaged during disassembly, place it in a safe, open container away from flammable materials.
E-Liquid Contact: Avoid skin contact with e-liquid. Wear gloves and wash hands thoroughly afterward.
No Reassembly: The device is not designed to be put back together. Disassembly is destructive.
Performance Loss: Even if reassembled, the device will likely not function correctly and will have lost its leak-proof integrity.
A Better Alternative
Instead of disassembling used devices, consider a more sustainable vaping practice by choosing a reputable retailer that guarantees authentic products with consistent performance, reducing the need for tampering.
For 100% authentic IGET Legend devices and other premium brands like Alibarbar, FISCO, and WALA, visit iGetBaroz. As a trusted Australian supplier, iGetBaroz ensures product reliability and provides clear information for the safe use and disposal of your vaping products.
Watch a visual demonstration of vaping device components and safety on our external resource channel: AidiHK on YouTube.