A flashing light on your IGET Legend is its way of communicating that something needs your attention. Don’t worry—this is a common occurrence and is rarely a sign of a serious fault. Typically, it indicates one of a few simple issues that are easy to diagnose and often fix yourself.
Here are the most common reasons and their solutions.
1. Low Battery
This is the most frequent cause. The IGET Legend has a built-in rechargeable battery, and the light will often flash to indicate it’s time for a charge.
The Fix: Connect your device to a USB charger using a standard charging cable (avoid fast chargers). The light will typically stay on or pulse slowly while charging and turn off or change color when fully charged. Allow it to charge completely before use.
2. Poor Connection or Contact Issues
Sometimes, the central post that connects the internal battery to the atomizer can become slightly misaligned or have e-liquid residue on it, interrupting the circuit.
The Fix:
Gently clean the bottom contact points of the device with a dry cotton bud.
Ensure the mouthpiece is securely attached but not over-tightened.
Give the device a few gentle taps against your palm to help any internal components settle.
3. Airflow Sensor Activation (Without Drawing)
The IGET Legend is draw-activated. If something blocks the airflow sensor (like dust, e-liquid, or accidental pressure), it might trigger the device to flash as if it’s being used.
The Fix: Check the airflow holes, usually located near the base or on the side. Ensure they are clear of any blockage. Give the device a gentle shake with the mouthpiece facing down on a tissue to clear any potential e-liquid from the sensor.
4. Auto Shut-Off / Puff Timeout
For safety, most devices have a puff timeout (usually around 8-10 seconds). If you draw for too long continuously, the device will flash and temporarily shut off to prevent overheating.
The Fix: Simply wait a few seconds and take a shorter, gentler puff.
5. The Device is Empty or Finished
The IGET Legend is designed for a specific number of puffs. Once the e-liquid is fully depleted, the device will often flash to indicate it has reached the end of its usable life.
The Fix: Unfortunately, this is not fixable. The device is a single-use unit and should be disposed of responsibly according to local regulations. It’s time for a new one.
Quick Troubleshooting Steps Summary:
Charge it: Plug it in for at least 30 minutes.
Clean it: Wipe the contacts and clear the airflow.
Check your draw: Use shorter, steadier puffs.
Check for life: If fully charged but still flashing on every draw with little to no vapour, it’s likely empty.
Important Safety Note
If your device is flashing erratically, becomes unusually hot, or you notice any leakage from the battery section, stop using it immediately. Place it in a safe, non-flammable area and dispose of it properly. These can be signs of a battery fault.
For authentic IGET products and reliable performance, it’s always best to purchase from authorised retailers like iGetBaroz, who guarantee genuine devices, clear batch codes, and can provide support for your purchase. If your brand new device is faulty upon arrival, a reputable seller will have a warranty process in place to assist you.