The IGET Bar is one of the most popular disposable vape devices in Australia, prized for its convenience and consistent performance. A common question among users looking to reduce waste or cost is: “Can you refill an IGET Bar?”
The short, official answer is no. IGET Bars are designed as sealed, non-refillable, and non-rechargeable single-use devices. Attempting to refill them is not recommended by the manufacturer, voids any warranty, and carries significant risks.
However, for experienced users who understand the risks and wish to attempt it for experimental or frugal purposes, here is a technical breakdown of the process, followed by crucial safety advice and official, safer alternatives from the IGET range available at retailers like iGetBaroz{:target=”_blank”}.
Part 1: Understanding Why Refilling is Not Advisable
Before attempting, consider these critical points:
Safety Hazard: The built-in battery is not designed for repeated use or exposure to e-liquid from tampering. Improper handling can lead to battery failure, leakage, or in extreme cases, thermal events.
Poor Performance: The coil and wick are calibrated for a specific amount of e-liquid. Once dry, the coil is likely burnt, and a refill will result in a burnt taste, weak vapour, and rapid gunking.
Leakage & Mess: The device’s seal will be compromised, almost guaranteeing e-liquid leakage, which is messy and can damage the battery.
Voided Authenticity: You will lose the assurance of using a quality-controlled, factory-sealed product.
Part 2: Step-by-Step Refill Process (At Your Own Risk)
If you proceed, you assume all responsibility. Ensure you work in a clean, well-ventilated area over a disposable cloth.
Tools Needed: A small flat-head screwdriver or prying tool, a bottle of nic salt e-liquid (preferably 50/50 PG/VG), paper towels.
Disassemble the Mouthpiece: Locate the small seam between the coloured body and the black mouthpiece. Carefully insert your prying tool and gently twist to pop the mouthpiece cap off. It is glued and may break.
Locate and Remove the Rubber Plug: Inside, you will see a silicone rubber plug sealing the central chimney and the fill port. Use a fine tool to carefully hook and remove this plug. Be extremely careful not to damage the thin wires or the central coil chimney.
Refill the Tank: Using your e-liquid bottle, slowly drip liquid into the fill port next to the central chimney, not down it. The cotton reservoir is small, typically holding 2ml. Fill slowly until the cotton looks saturated but not overflowing.
Re-seal and Reassemble: Wipe away any excess liquid. Carefully place the rubber plug back into its slot. Press the mouthpiece cap back on firmly. Let the device sit upright for 5-10 minutes to allow the wick to fully saturate (“prime”).
Part 3: What to Expect After Refilling
Significantly Reduced Performance: Vapour production and flavour intensity will be notably weaker.
Potential Burnt Taste: If the original coil was already burnt, this taste is permanent.
High Probability of Leakage: The compromised seal will often lead to liquid seeping from the mouthpiece.
Shortened Lifespan: The battery may die before the new e-liquid is fully consumed.
Part 4: Official IGET Alternatives for a Refillable Experience
Instead of risking a refill on a disposable device, IGET offers excellent pod systems designed specifically for refilling and reuse, providing a safer, more reliable, and cost-effective experience. These are readily available from authorised Australian retailers like iGetBaroz.
IGET BOXX: This is a powerful pod mod kit with a refillable pod cartridge and a large rechargeable battery. It offers adjustable airflow and wattage for a customisable experience far superior to any refilled disposable.
IGET Bar Plus / IGET ONE: While these are technically high-puff-count disposables, their robust, rechargeable design is intended for their full factory-filled lifespan. For a truly refillable routine, the BOXX is the recommended choice.
Conclusion & Strong Recommendation
Refilling an IGET Bar is a high-risk, low-reward practice that compromises safety and performance. The engineering and quality control that make IGET products reliable are voided once the device is tampered with.
For vapers seeking a more sustainable or cost-effective solution, the smart choice is to transition to a purpose-built refillable pod system like the IGET BOXX. This ensures you enjoy consistent flavour, guaranteed safety, and a superior vaping experience. Explore the full range of genuine IGET products, from disposables to advanced kits, at your trusted source, iGetBaroz{:target=”_blank”}.
Disclaimer: This guide is for informational purposes only. Tampering with electronic devices can be dangerous. Always prioritise using products as intended by the manufacturer.