If you’re wondering whether you can recharge your IGET Bar with a phone charger, the answer is: it depends entirely on which IGET model you have. Not all IGET devices are designed to be recharged, and attempting to charge a non-rechargeable model can be dangerous.
This guide will walk you through how to identify your device, the correct way to recharge compatible models, and crucial safety tips to protect both your device and yourself.
Step 1: Identify Your IGET Model
First, determine if your IGET Bar is rechargeable. Look for a small USB-C or Micro-USB charging port on the bottom or side of the device.
IGET Bar (Original/Classic): These are typically non-rechargeable, disposable devices. They do not have a charging port. Once the battery or e-liquid is depleted, the device is designed to be disposed of. Do not attempt to open or recharge these.
IGET Bar Plus / IGET Bar ONE: These popular models are rechargeable. They feature a discreet USB-C port (on newer models) or a Micro-USB port (on some older stock) at the bottom, allowing for multiple uses until the e-liquid runs out.
Quick Check: Turn your device over. If you see a sealed, flat bottom with no openings, it is not rechargeable. If you see a small, covered port, it is rechargeable.
Step 2: How to Safely Recharge a Compatible IGET Bar
For IGET Bar Plus, IGET Bar ONE, or any IGET with a visible charging port, follow these steps:
Use the Right Cable: Use a standard USB-A to USB-C (or Micro-USB) cable. The cable that came with your Android phone or most common data cables will work.
Use a Standard Wall Adapter: Plug the USB end into a low-power wall charger. The 5W/1A “block” that often comes with older phones is ideal. Avoid using fast chargers (e.g., Quick Charge, USB-PD), laptop ports, or car chargers initially, as they can sometimes deliver too much current for a small vape battery.
Connect and Monitor: Gently insert the cable into your IGET device. The device will usually have a small LED indicator that lights up to show it’s charging. The light will typically turn off or change colour when fully charged.
Charging Time: A full charge usually takes 60-90 minutes. Do not leave it charging unattended for extended periods (e.g., overnight).
Disconnect: Once the indicator shows a full charge or goes off, disconnect the device from the charger.
Crucial Safety Warnings & Best Practices
NEVER Charge a Non-Rechargeable Device: Tampering with a sealed disposable can damage the battery, cause leakage, or in extreme cases, lead to fire or injury.
Avoid “Fast Charging” Ports: While many modern IGET devices have protective circuits, using a standard 5V/1A charger is the safest practice to prolong battery health.
Do Not Use While Charging: For safety, avoid puffing on the device while it is plugged in.
Inspect the Port and Cable: Ensure the charging port is free of e-liquid or debris before connecting. Use an undamaged cable.
Charge on a Non-Flammable Surface: Place the device on a bench, desk, or countertop away from beds, sofas, or carpets during charging.
What to Do If Your IGET Bar Has No Charging Port
If you have a standard, non-rechargeable IGET Bar that has run out of battery but still has e-liquid, the device has reached its intended end of life. The safest and recommended course of action is to dispose of it responsibly and switch to a rechargeable model for better value and reduced waste.
For your next purchase, consider the IGET Bar Plus (2500 puffs) or IGET Bar ONE (2600 puffs) from a trusted retailer like iGetBaroz{:target=”_blank”}. They offer the same great IGET flavours in a rechargeable format, saving you money in the long run and providing a more consistent experience until the last drop of e-liquid.
Need a reliable source for authentic, rechargeable IGET devices? Explore the full range and find detailed specifications for each model at iGetBaroz{:target=”_blank”}, Australia’s trusted destination for premium vaping products.
