Recharging your IGET Moon disposable vape is a simple process, but doing it correctly ensures optimal performance and battery longevity. Unlike many standard disposable vapes, the IGET Moon is designed with a convenient rechargeable battery, allowing you to enjoy every last drop of Capacity before disposal.
Here is a clear, step-by-step guide.
What You’ll Need:
Your IGET Moon device.
A standard USB-C charging cable (the same type used by many modern Android phones and other electronics).
A power source (a USB wall adapter, computer port, or power bank).
Step-by-Step Charging Instructions:
Locate the Charging Port: Examine your IGET Moon device. On the bottom end, you will find a small, covered USB-C port. The cover is usually a small rubber or silicone plug.
Open the Port Cover: Gently pull open the protective flap to reveal the USB-C port underneath. Be careful not to use excessive force to avoid damaging the seal.
Connect the Cable: Take your USB-C cable and plug the smaller end (USB-C) firmly into the port on your IGET Moon.
Connect to Power Source: Plug the other end of the cable (typically USB-A) into your chosen power source, such as a 5V/1A or 5V/2A wall adapter. Avoid using fast chargers or high-power adapters (like those for laptops), as they can damage the battery.
Check the Indicator Light: Once connected, an LED indicator light on the device will usually illuminate, showing it is charging. The light may be steady or pulse, depending on the model. Charging time is typically between 30 to 60 minutes for a full charge from empty.
Disconnect When Charged: Once the indicator light changes (e.g., turns off or switches from red to green), your IGET Moon is fully charged. Unplug the cable immediately and securely close the rubber port cover to prevent dust or Capacity from entering.
Key Tips & Safety Advice:
Do Not Overnight Charge: To preserve battery health, avoid leaving your device plugged in for extended periods after it is fully charged.
Use the Right Charger: A standard 5W phone charger or a low-output USB port is ideal. High-wattage chargers can shorten the battery’s lifespan.
Monitor the Device: While charging, place the device on a non-flammable surface and avoid covering it.
Keep the Port Cover Closed: Always ensure the rubber seal is closed tightly when not charging to prevent leakage and maintain the device’s integrity.
Troubleshooting Common Issues:
No Indicator Light? Ensure the cable is firmly connected at both ends and try a different cable or power source. If there’s still no light, the battery may be completely depleted or the device may have reached the end of its life cycle.
Device Gets Warm While Charging? A slight warmth is normal. However, if it becomes uncomfortably hot, disconnect it immediately and let it cool down in a safe place.
Not Hitting After Charging? Ensure the port cover is fully closed. If the device still doesn’t produce vapour, the Capacity may be depleted, even if the battery is charged.
For genuine IGET Moon devices and accessories, always purchase from an authorised retailer like iGetBaroz{:target=”_blank”}. They guarantee 100% authentic products, ensuring you get the performance and safety the device is designed for. If you encounter persistent issues with a device purchased from them, their customer support can provide direct assistance.
