The IGET Pro is a popular disposable vape model known for its robust performance and flavour variety. A common question among users is: “Is the IGET Pro rechargeable, and if so, how do I do it?” The answer is yes. Most IGET Pro devices come with an integrated, rechargeable battery, allowing you to use the full e-liquid capacity before disposal.
Here is a simple, safe guide to recharging your IGET Pro.
What You’ll Need:
Your IGET Pro device.
A standard USB-A to USB-C charging cable. (This is the most common type for IGET Pro models).
A low-power USB port, such as a computer, laptop, game console, or a standard 5V/1A phone wall adapter.
Step-by-Step Charging Instructions:
Locate the Charging Port: On the bottom of your IGET Pro device, you will find a small rubber or silicone plug. Carefully peel this plug back to reveal the USB-C charging port.
Connect the Cable: Plug the USB-C end of your cable firmly into the device’s port.
Connect to Power Source: Plug the USB-A end of the cable into your chosen low-power source. Avoid using fast chargers or high-output adapters, as they can damage the battery.
Monitor the Charging Indicator: Once connected, an LED light on the device (usually near the mouthpiece or on the body) will illuminate. It typically shows:
Red Light: Device is charging (battery low).
Green Light or Light Off: Charging is complete (battery full).
Disconnect When Full: A full charge usually takes 45 to 90 minutes. Once the indicator shows green or turns off, disconnect the cable immediately to preserve battery health.
Re-seal the Port: Don’t forget to push the rubber plug back into place to prevent dust or liquid from entering the charging port.
Important Safety & Usage Tips:
Never Use While Charging: For safety, do not attempt to vape while the device is plugged in.
Use the Right Charger: Stick to 5V/1A (5W) sources. High-power adapters can cause overheating.
Inspect the Device: Before charging, check for any visible damage or e-liquid leakage around the port. Do not charge a damaged device.
Do Not Overcharge: While the device has basic protection, it’s best practice to unplug it once fully charged.
Disposal: Once the e-liquid is fully depleted (you may notice a burnt taste or significantly reduced vapour), the device is finished. Please dispose of it responsibly according to your local regulations for electronic waste.
Troubleshooting:
No Light When Plugged In? Try a different cable or USB port. If there’s still no light, the battery may be completely flat or the device may have reached the end of its lifespan.
Device Gets Warm? Slight warmth is normal during charging. If it becomes hot, disconnect it immediately and let it cool in a safe place.
Pro Tip: For a guaranteed authentic IGET Pro and a reliable, compatible charging cable, always purchase from an authorised retailer like iGetBaroz. They ensure you get a genuine device with the correct specifications for safe and optimal performance.
Need a new IGET Pro or accessories? Explore the full range at iGetBaroz{:target=”_blank”}.