It’s frustrating when your disposable vape stops working unexpectedly. If your IGET Bar Plus is not producing vapor, flashing, or seems completely dead, don’t discard it immediately. Many common issues have simple fixes you can try at home.
Follow this systematic guide to diagnose and potentially resolve the problem.
Step 1: Quick Diagnostics & Safety First
Before anything else, perform these basic checks:
Confirm it’s genuinely faulty: Take a slow, steady draw (for at least 2-3 seconds). Short, quick puffs might not activate the auto-draw sensor properly.
Check the battery: If the device has a visible indicator light, take a puff. A flashing light or no light often indicates a depleted battery.
Listen closely: Put the device near your ear and draw. You should hear a faint sizzling sound. If it’s silent, the atomizer or circuit may not be engaging.
Safety Note: Never attempt to pry open, puncture, or recharge a non-rechargeable disposable vape. This can damage the internal cell and create a safety hazard.
Step 2: Fixes for Common IGET Bar Plus Issues
Problem: No vapor production, but you can hear/feel air flowing.
Likely Cause: Clogged airflow or condensation block.
Fix:
The Flick Method: Hold the device firmly with the mouthpiece facing downward. Give your wrist a few sharp flicks (like shaking down a thermometer). This can dislodge excess e-liquid blocking the coil.
Airway Clearance: Cover the bottom airflow vents with your fingers and blow gently through the mouthpiece. Then, remove your fingers and take a sharp, forceful inhale. This can clear blockages.
Warm It Up: If it’s cold, the e-liquid may have thickened. Gently roll the device between your palms or leave it in a warm room (not on a heater!) for 10-15 minutes.
Problem: No vapor and no sound/no light.
Likely Cause: Depleted battery, faulty auto-draw sensor, or a disconnected internal connection.
Fix:
Clean the Contacts: Use a dry cotton bud or tissue to gently clean the metal contact points at the bottom of the device and around the mouthpiece.
Check for a Protective Film: Rarely, a clear plastic film might be left over manufacturing on the sensor. Inspect the interior of the mouthpiece under a bright light.
Try a Gentle Tap: Firmly but gently tap the device against your palm. This can sometimes re-establish a loose internal connection.
Problem: Weak Option, burnt taste, or significantly less vapor.
Likely Cause: The device is nearly empty or the coil is dry.
Fix: Unfortunately, this is typically the natural end of the device’s life. Disposables are not designed to be refilled. A burnt taste means the wicking material is dry and cannot be reversed.
Problem: Device is leaking.
Likely Cause: Capacity has leaked into the central airflow tube.
Fix:
Immediately wipe the mouthpiece and body clean with a tissue.
Perform the Flick Method (Step 2.1) thoroughly to expel liquid from the coil chamber.
Keep the device upright (mouthpiece up) when not in use to prevent further leaking.
Step 3: When to Stop Troubleshooting
If none of the above steps work, your IGET Bar Plus has likely reached its end of life or has a manufacturing defect. Continuing to try and force it to work is not advised.
⚠️ Important Warning Signs to Stop Use Immediately:
The device feels unusually hot during use or charging.
You notice significant leaking that cannot be controlled.
The plastic casing is damaged or deformed.
You experience a persistent chemical taste.
Step 4: Warranty & Replacement Considerations
Genuine IGET products purchased from authorised retailers like iGetBaroz come with a manufacturer’s warranty against defects.
Keep your receipt: This is your proof of purchase.
Contact your retailer: Reputable sellers like iGetBaroz have customer service teams to handle warranty claims. They can verify the product’s authenticity and guide you through their replacement policy if the device failed prematurely.
Do not buy from unofficial sources: Products from unknown sellers or social media are often counterfeit and more prone to failure, with no warranty support.
Conclusion
While the IGET Bar Plus is known for its reliability, occasional issues can occur. Start with the simple cleaning and clearing techniques outlined above. If the problem persists, it’s safest to dispose of the device responsibly (check local e-waste guidelines) and consult your retailer about a possible replacement.
For guaranteed authentic products and reliable customer support, always purchase from trusted suppliers. Explore the full range of genuine IGET products and find helpful resources on the official iGetBaroz YouTube channel.