Charging your IGET Pro disposable vape is a simple process, but doing it correctly ensures optimal performance, battery safety, and extends the life of your device. This guide covers everything you need to know.
The IGET Pro series (and similar models like the IGET Pro Plus or IGET Pro Max) typically feature a built-in USB-C or Micro-USB port for recharging, allowing you to use the entire e-liquid capacity before the battery dies.
What You’ll Need
Your IGET Pro device.
A compatible USB cable (usually USB-C, sometimes Micro-USB). Note: The cable is often not included in the package.
A safe power source:
A computer/laptop USB port.
A standard USB wall adapter (5V/1A or 5V/2A is ideal).
A portable power bank.
Step-by-Step Charging Instructions
Step 1: Locate the Charging Port
Examine your IGET Pro. The charging port is usually located on the bottom end of the device. It may be protected by a small rubber or silicone plug. Gently remove this plug to reveal the port.
Step 2: Connect the Cable
Take your USB cable and plug the appropriate end (USB-C or Micro-USB) firmly but gently into the IGET Pro’s charging port.
Step 3: Connect to Power Source
Plug the other end (standard USB-A) into your chosen power source (e.g., wall adapter, computer, power bank).
Step 4: Monitor the Indicator Light
Most IGET Pro devices have an LED indicator light near the mouthpiece or on the body. During charging:
The light will typically glow red or remain steadily on.
Once the device is fully charged, the light will turn off or change to blue/green (this varies by model).
A full charge usually takes 60 to 90 minutes.
Step 5: Disconnect and Re-seal
Once the indicator shows a full charge, disconnect the cable from both the device and the power source. Important: Always replace the rubber charging port plug to prevent dust, lint, or e-liquid from entering and causing potential issues.
Critical Safety Tips & Best Practices
⚠️ Always use a standard, undamaged USB cable and a low-power source (1A-2A). Avoid fast chargers (e.g., for smartphones or tablets) as they can damage the battery.
⚠️ Never leave your device charging unattended or overnight. Overcharging can degrade the battery.
⚠️ If the device becomes excessively hot during charging, disconnect it immediately. This is a sign of a potential fault.
⚠️ Do not use the vape while it is charging. This can strain the battery and circuit.
⚠️ Ensure the charging port and plug are dry before connecting. Moisture can cause a short circuit.
Troubleshooting Common Charging Issues
No Indicator Light When Plugged In: Check your cable and power source with another device to ensure they are working. Try a different cable if possible.
Device Won’t Hit After Charging: Ensure it is fully charged. Some devices have a safety timeout; take a few gentle primer puffs (without inhaling) to reactivate it.
Light Turns Off Immediately: The battery may be completely depleted or faulty. If it doesn’t charge after 10-15 minutes on a confirmed-working power source, the device may be defective.
Flashing Light During Use/Charging: This often indicates a low battery, a short circuit, or a connection error. Try cleaning the charging port with a dry cotton bud and reconnecting.
Where to Find Authentic IGET Pro Devices & Support
For guaranteed authentic IGET products, including the latest IGET Pro models, cables, and reliable customer support for any questions, always purchase from an authorised retailer like iGetBaroz.
Remember: Proper charging habits are key to getting the full value and lifespan from your disposable vape. When in doubt, refer to this guide and always prioritize safety. For more information on IGET products and care tips, visit the official iGetBaroz website.